Hot Smok Novo Review – An Overview of the Smoking HOT Product
As someone that is clearly a huge fan of my Smok Novo line of electronic products really was excited to get a try of this brand new Smok Novo 2 mini pod machine. I’ve been using a lot of Smok Novo products and really was amazed at how easy and simple the original Smok Novo I used was to use and keep maintaining. My first impression was that it performed well, but after further testing I found out that the energy output wasn’t quite as high as I’d expected. But other than that, the device itself did what I expected it to do and that was to record two CDs simultaneously. A big plus is that it can be utilized in either ‘hot’ or ‘cold’ recording mode. After recording, it also has a built-in auto-playing function which was a real appreciated feature of my original Smok Novo.
The 1st time I used my Smok Novo 2.0 it didn’t charge very fast at all. After plugging it in to the USB port on my laptop for a couple minutes, I noticed that it was already powered up but there is no sound coming out of it. After waiting a bit longer I pointed out that the LED light on the front of it started to flash. At this point I decided that maybe I had a need to buy a new charger or I possibly could at least test out the functionality of my unit.
To test the specific functionality of my new electronic device, I plugged in some high quality music from my computer to hear what sound arrived. Surprisingly, not a good deal of noise arrived of it. However, I soon realized that the actual voltage was not getting attached to my device properly and that is when I then found out that the battery must have Short circuits. As you may expect, if the voltage is not properly attached to your digital camera, then you will not be able to use it and you will have to purchase a replacement. However, the Smok Novo 2.0 is made with two different body kits such as a special connector for the most common voltage types.
In order to use the Smok Novo 2.0 with ease, I decided to do Puff Bar Flavors a taste testing to observe how close the device could arrived at resembling a real coffee pod. I also desire to compare the audio quality to that of a typical RCD Pod. In order to do this, I attached a good soundboard and connected my computer to the soundboard utilizing a FireWire connection. After recording a short sound file, I did a comparison with the Smok Novo 2.0. I measured the power output and then compared it to a “real” RCD Pod.
In comparing the Smok Novo 2.0 to R CDs, I noticed that there were several advantages that the logo 2.0 had over R CDs. First, there have been minimal noticeable R CD noise and second, the depth of tone in the sound file was much better than that of an R CD. Furthermore, the power output that the logo 2.0 offered also performed superior to that of R CDs.
When looking at the novo 2.0 mesh coil, I noticed that there were some differences between your actual Smok Novo 2.0 that I had and the main one I had previously reviewed. I also noticed that the mesh coil on the novo 2.0 bore a striking resemblance to that of a car stereo speaker. As far as the logo 2.0 unit itself, I found that the sound quality was superior to that of my previous Smok Novo review, but I still cannot hear any distortion or muffled sounds when hearing music through my headphones. By the end of my review, I gave my positive Smok Novo 2.0 review and explained that the novo 2.0 featured a front metal panel with textured plastic surround that contained four conductors.
During my review of Smok Novo 2.0, I made sure to mention that the device featured a competent two-lane micro USB port that features a full range of connection capabilities. I went on to say that the novo 2.0 was super easy to utilize, with simple buttons located all over the front and side of the device. The device has a unique advantage over other electronic devices such as mp3 players along with other similar products because it will not require any kind of software to operate. Instead, the device connects to your computer during your micro USB port and can be played directly from the device without requiring any extra software downloads or drivers.
The next item in my overview of Smok Novo 2.0 was the novo2 multi functional pod, which acts as the control center for this digital camera. This pod sits on the bottom of your device and contains an electrical boost button, a volume control switch, a sign control switch, a touch-tone button, and also a full working link to a computer. The mtl airflow that is included with this Pod is one of my favorite parts of this electronic device. The airflow enables you to easily clean the outer surface of one’s device while it performs the duty of cooling your digital device. The Smok Novo 2.0 has many of these functions and more, making it one awesome little device.